ADTRAN AOS Version R10.1.0 Command Reference Manual page 222

Command Reference Guide
debug atm events
Use the debug atm events command to display events on all asynchronous transfer mode (ATM) ports and
all virtual circuits. Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use the no
form of this command to disable the debug messages.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 8.1
Usage Examples
The following example activates ATM event messages:
>enable
#debug atm events
60000CRG0-35E
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
222