ADTRAN AOS Version R10.1.0 Command Reference Manual page 822

Command Reference Guide
show voice users
Use the show voice users command to display all voice user stations. Variations of this command include:
show voice users
show voice users did
show voice users extension
show voice users last
show voice users location
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
did
extension
last
location
Default Values
No default values are necessary for this command.
Command History
Release 10.1
Release 14.1
Release 17.1
Release A4.03
Usage Examples
The following example displays all voice users:
>enable
#show voice users
First Last
--------------------------------------------------------------------------------------------
Janet Smith
Bill Jones
60000CRG0-35E
Optional. Displays all users included in the directory.
Optional. Displays directory entries sorted by extensions.
Optional. Displays directory entries sorted by last name.
Optional. Displays the location of users in the directory.
Command was introduced.
Command was expanded.
Command was expanded to include the modifiers begin, exclude, and
include.
Command was expanded to include the location parameter.
Ext Interface Description
5200 virtual
6000 virtual
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
822