ADTRAN AOS Version R10.1.0 Command Reference Manual page 591

Command Reference Guide
Using the realtime argument for this command can adversely affect the performance of
your unit.
Syntax Description
<ipv4 address>
<subnet mask>
bgp
connected
longer-prefixes
ospf
rip
static
summary
summary realtime
table
verbose
vrf <name>
Default Values
No default values are necessary for this command.
Command History
Release 1.1
Release 10.1
Release 16.1
Release 17.1
Release A1
Release 17.2
60000CRG0-35E
Optional. Specifies a valid IPv4 address. IPv4 addresses should be
expressed in dotted decimal notation (for example, 10.10.10.1).
Optional. Specifies the subnet mask that corresponds to a range of IPv4
addresses (network) or a specific host. Subnet masks can be expressed in
dotted decimal notation (for example, 255.255.255.0) or as a prefix length
(for example, /24).
Optional. Displays only the IPv4 routes associated with Border Gateway
Protocol (BGP).
Optional. Displays only the IPv4 routes for directly connected networks.
Optional. Displays only the IPv4 routes matching the specified network.
Optional. Displays only the IPv4 routes associated with open shortest path
first (OSPF).
Optional. Displays only the IPv4 routes that were dynamically learned
through Routing Information Protocol (RIP).
Optional. Displays only the IPv4 routes that were statically entered.
Optional. Displays a summary of all IPv4 route information.
Optional. Displays full-screen output in real time. Refer to the Functional
Notes below for more information.
Optional. Displays a condensed version of the IPv4 route table.
Optional. Enables detailed messaging.
Optional. Displays only the IPv4 routes for the specified VPN routing and
forwarding (VRF).
Command was introduced.
The realtime display parameter was introduced.
Expanded to include the vrf parameter.
Command was expanded to include the modifiers begin, exclude, and
include.
Command was expanded to include the verbose parameter.
Command was enhanced to show the best route to the given IP address
and the longer-prefixes parameter was added.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
591