ADTRAN AOS Version R10.1.0 Command Reference Manual page 817

Command Reference Guide
show voice status-group
Use the show voice status-group command to display information on all voice status groups or on a
specified group. Variations of this command include:
show voice status-group
show voice status-group <name>
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
<name>
Default Values
No default values are necessary for this command.
Command History
Release 14.1
Release 17.1
Usage Examples
The following example displays all voice status group extensions:
>enable
#show voice status-group
Status-group: Sales Team
Description:
Type Member ID
-----------------------------------------------------------------------
user 2001
user 3002
user 3003
user 3004
user 4001
Number of members: 5
60000CRG0-35E
Optional. Displays all users within the specified status group.
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Display Name Status
Martha Idle
Dan Idle
Betty Idle
Chris Idle
Jami Idle
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
817