ADTRAN AOS Version R10.1.0 Command Reference Manual page 246

Command Reference Guide
debug dynamic-dns
Use the debug dynamic-dns command to activate debug messages associated with dynamic domain
naming system (DNS). Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use
the no form of this command to disable the debug messages. Variations of this command include:
debug dynamic-dns
debug dynamic-dns verbose
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
verbose
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 11.1
Usage Examples
The following example activates dynamic DNS debug messages:
>enable
#debug dynamic-dns verbose
60000CRG0-35E
Optional. Activates detailed debug messages.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
246