Command Reference Guide
run checkdisk usbdrive0
Use the run checkdisk usbdrive0 to run checkdisk to check and fix file system errors on the Universal
Serial Bus (USB) drive. Variations of this command include:
run checkdisk usbdrive0
run checkdisk usbdrive0 dontfix
Syntax Description
dontfix
Default Values
No default values are necessary for this command.
Command History
Release 18.2
Usage Examples
The following example checks and fixes file system errors on the USB flash drive:
>enable
#run checkdisk usbdrive0
60000CRG0-35E
Specifies the unit to run checkdisk on the USB flash drive without fixing
errors.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
413