Command Reference Guide
debug tacacs+
Use the debug tacacs+ command to activate debug messages associated with terminal access controller
access-control system plus (TACACS+) protocol. Debug messages are displayed (real time) to the
terminal (or Telnet) screen. Use the no form of this command to disable the debug messages. Variations of
this command include:
debug tacacs+
debug tacacs+ events
debug tacacs+ packets
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
events
packets
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 11.1
Usage Examples
The following example activates debug messages associated with the TACACS+ protocol:
>enable
#debug tacacs+ packets
60000CRG0-35E
Optional. Activates TACACS+ event debug messages.
Optional. Activates TACACS+ packet debug messages.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
369