ADTRAN AOS Version R10.1.0 Command Reference Manual page 341

Command Reference Guide
debug packet-capture
Use the debug packet-capture command to enable debug messaging for all packet-capture activities. Use
the no form of this command to disable packet-capture debug messaging.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release R10.1.0
Usage Examples
The following example enables debug messaging for all packet-capture activities:
>enable
#debug packet-capture
60000CRG0-35E
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
341