ADTRAN AOS Version R10.1.0 Command Reference Manual page 372

Command Reference Guide Enable Mode Command Set
debug voice
Use the debug voice command to activate debug messages associated with voice functionality. Debug
messages are displayed (real time) on the terminal (or Telnet) screen. Use the no form of this command to
disable the debug messages. Variations of this command include the following:
debug voice account-status
debug voice autoattendant
debug voice conference local
debug voice dsp
debug voice dsp fax
debug voice dsp fax detailed
debug voice dsp isu_cp_det
debug voice dsp isu_cp_det <number>
debug voice dsp voip <slot/port> channel verbose
debug voice dsp voip <slot/port> channel <number> ecan
debug voice dsp voip <slot/port> channel <number> rfc2833
debug voice erltool
debug voice erltool info
debug voice erltool statemachine
debug voice findme-followme
debug voice findme-followme <extension>
debug voice lineaccount
debug voice lineaccount <line>
debug voice linemanager
debug voice linemanager <line>
debug voice loopback
debug voice mail
debug voice mail <subsource>
debug voice moh
debug voice moh app
debug voice moh player
debug voice paging-group
debug voice paging-group <extension>
debug voice phonemanager
debug voice phonemanager <slot:port>
debug voice promptstudio
debug voice proxydial
debug voice queue
debug voice replication
debug voice ring-group
debug voice rtp channel
debug voice rtp conference local
debug voice rtp manager
debug voice rtp provider
debug voice rtp verbose
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 372