ADTRAN AOS Version R10.1.0 Command Reference Manual page 298

Command Reference Guide
debug ip pim-sparse assert
Use the debug ip pim-sparse assert command to display debug messages associated with
protocol-independent multicast (PIM) sparse assert transactions. Debug messages are displayed (real time)
to the terminal (or Telnet) screen. Use the no form of this command to disable the debug messages.
Variations of this command include:
debug ip pim-sparse assert
debug ip pim-sparse assert event
debug ip pim-sparse assert event <multicast address>
debug ip pim-sparse assert state
debug ip pim-sparse assert state <multicast address>
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
event
state
<multicast address>
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 11.1
Usage Examples
The following example activates all PIM sparse assert event messages:
>enable
#debug ip pim-sparse assert event
14:25:05: PIMSM: Assert - MRoute (*, 239.255.255.250, eth 0/2) processed Received Join in NoInfo state
14:25:29: PIMSM: Assert - MRoute (10.100.13.240, 239.192.19.136, eth 0/2) processed Received Join in
NoInfo state
14:25:29: PIMSM: Assert - MRoute (*, 239.192.19.136, eth 0/2) processed Received Join in NoInfo state
14:26:05: PIMSM: Assert - MRoute (*, 239.255.255.250, eth 0/2) processed Received Join in NoInfo state
60000CRG0-35E
Optional. Displays PIM sparse assert events.
Optional. Displays PIM sparse assert state changes.
Optional. Specifies multicast group IP address to filter. The multicast group
IP address range is 244.0.0.0 to 239.255.255.255 or 224.0.0.0 /4.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
298