ADTRAN AOS Version R10.1.0 Command Reference Manual page 328

Command Reference Guide
debug isdn
Use the debug isdn command to activate debug messages associated with integrated services digital
network (ISDN) events in AOS. Debug messages are displayed (real time) to the terminal (or Telnet)
screen. Use the no form of this command to disable the debug messages. Variations of this command
include the following:
debug isdn cc-ie
debug isdn cc-ie pri
debug isdn cc-ie pri <number>
debug isdn cc-messages
debug isdn cc-messages pri
debug isdn cc-messages pri <number>
debug isdn endpoint
debug isdn endpoint pri
debug isdn endpoint pri <number>
debug isdn interface
debug isdn interface pri
debug isdn interface pri <number>
debug isdn l2-formatted
debug isdn l2-formatted pri
debug isdn l2-formatted pri <number>
debug isdn l2-messages
debug isdn l2-messages pri
debug isdn l2-messages pri <number>
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
cc-ie
cc-messages
endpoint
interface
l2-formatted
l2-messages
pri
pri <number>
Default Values
By default, all debug messages in AOS are disabled.
60000CRG0-35E
Displays call control information elements.
Displays call control messages.
Displays endpoint events.
Displays ISDN interface events.
Displays Layer 2 formatted messages.
Displays Layer 2 messages.
Optional. Specifies the ISDN interface.
Optional. Specifies a specific ISDN interface. Range is 1 to 255.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
328