ADTRAN AOS Version R10.1.0 Command Reference Manual page 943

Command Reference Guide Global Configuration Mode Command Set
ethernet cfm
Use the ethernet cfm command to enable Ethernet operations, administration, and maintenance (OAM)
connectivity fault management (CFM) on the AOS device. Use the no form of this command to disable
Ethernet OAM CFM.
Syntax Description
No subcommands.
Default Values
By default, Ethernet OAM CFM is disabled.
Command History
Release 17.4 Command was introduced.
Functional Notes
For more information regarding Ethernet OAM CFM and its operation on AOS products, refer to the
Ethernet OAM CFM in AOS configuration guide available online at https://supportforums.adtran.com
(article number 3013).
For more information regarding specific Ethernet OAM CFM configuration commands, refer to the Ethernet
OAM CFM Command Set on page 3091.
Usage Examples
The following example enables Ethernet OAM CFM on an AOS device:
(config)#ethernet cfm
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 943