Command Reference Guide
Enable Mode Command Set
The following example activates the debug messages associated with IPv4 routing table events on the
nondefault VRF named RED and provides sample output:
>enable
#debug ip routing vrf RED
ip route vrf RED 1.2.3.0 255.255.255.0 192.168.10.10
15:32:29: ROUTING: Add route for 1.2.3.0/24 nh=192.168.10.10 vrf=RED
15:32:29: ROUTING: Remove route for 1.2.3.0/24 nh=192.168.10.10 vrf=RED
15:32:29: ROUTING: Add route for 1.2.3.0/24 nh=192.168.10.10 vrf=RED
15:32:29: ROUTING: Remove route for 1.2.3.0/24 nh=192.168.10.10 vrf=RED
15:32:29: ROUTING: Add route for 1.2.3.0/24 nh=192.168.10.10 vrf=RED
Where:
nh=192.168.10.10 indicates the next-hop address.
vrf=RED indicates the nondefault VRF where the route is present.
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
308