ADTRAN AOS Version R10.1.0 Command Reference Manual page 966

Command Reference Guide
http language
Use the http language command to specify the language of the Web-based Graphical User Interface (GUI)
on the AOS device. Use the no form of this command to return the GUI language to the default value.
Variations of this command include:
http language english
http language frenchcanadian
http language italian
http language latinamspanish
http language simplifiedchinese
Syntax Description
english
frenchcanadian
italian
latinamspanish
simplifiedchinese
Default Values
By default, the GUI is displayed in English.
Command History
Release 3.1
Release 13.1
Release 14.1
Release 18.3
Release R10.1.0
Usage Examples
The following example specifies that the AOS GUI is displayed in French Canadian:
(config)#http language frenchcanadian
60000CRG0-35E
Specifies the GUI language is English.
Specifies the GUI language is French Canadian.
Specifies the GUI language is Italian.
Specifies the GUI language is Latin American Spanish.
Specifies the GUI language is Simplified Chinese.
Command was introduced.
Command was expanded to include Italian.
Command was expanded to include French Canadian, Latin American
Spanish, and Simplified Chinese languages.
Command syntax was changed to remove the ip keyword to support IPv6 in
ADTRAN internetworking products.
Command syntax was changed to remove the ip keyword for ADTRAN
voice products.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
966