ADTRAN AOS Version R10.1.0 Command Reference Manual page 496

Command Reference Guide
show fan-tach
Use the show fan-tach command to view the unit's current fan speed.
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release 6.1
Release 17.1
Usage Examples
The following example shows the current fan speed:
>enable
#show fan-tach
Fan Tach (in rpm) Current
Processor 8160
Chassis 1 3060
Chassis 2 3120
60000CRG0-35E
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Min Max
8100 17804
3060 31380
3060 31560
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
Avg
8544
4237
4277
496