ADTRAN AOS Version R10.1.0 Command Reference Manual page 207

Command Reference Guide
copy running-config
Use the copy running-config command to create a copy of the current running configuration and replace
the current startup configuration or save it to a specified location.
Variations of this command (valid on all AOS units) include:
copy running-config <filename>
copy running-config http <url>
copy running-config https <url>
copy running-config tftp
copy running-config xmodem
Variations of this command (valid only on AOS units WITH CompactFlash
copy running-config cflash <filename>
copy running-config cflash startup-config
copy running-config flash <filename>
copy running-config flash startup-config
Variations of this command (valid only on AOS units WITH CompactFlash AND voice capability)
include:
copy running-config dynvoice-config
copy running-config dynvoice-config tftp
copy running-config dynvoice-config http <url>
copy running-config non-dynvoice-config http <url>
Variations of this command (valid only on AOS units WITH ramdisk enabled) include:
copy running-config ramdisk <filename>
Variations of this command (valid only on AOS units WITH Universal Serial Bus (USB) flash drive
capability) include:
copy running-config usbdrive0 <filename>
copy running-config usbdrive0 startup-config
Syntax Description
cflash
dynvoice-config
<filename>
flash
60000CRG0-35E
Copies the current running configuration and saves it to the CompactFlash
card.
Copies the current active voice running configuration and saves it to the
dynamic voice configuration file.
Specifies the filename to use when saving the configuration file.
Copies the current running configuration and saves it to flash memory.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
®
capability) include:
207