ADTRAN AOS Version R10.1.0 Command Reference Manual page 825

Command Reference Guide
show voip name-service cache
Use the show voip name-service cache command to view Voice over Internet Protocol (VoIP) name
service information stored in the cache.
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release A2.04
Functional Notes
The information displayed in the show command output consists of two columns. The left column lists the
host name of an entry in the VoIP Name Service Name Table. This corresponds with the entries shown in
the output of the command
corresponding last resolved IP address(es) of the entry. An IP address of all zeros indicates the particular
host has not been resolved. In the event all domain naming system (DNS) servers are unreachable and a
particular host name cannot be refreshed, the DNS uses the cached address to resolve the particular host.
Usage Examples
The following example displays name service information stored in the cache:
>enable
#show voip name-service cache
Name
----------------------------------------------------------------------------------------------------
test2.pprice.voice.test.adtran.com
bogus3.pprice.voice.test.adtran.com
test.pprice.voice.test.adtran.com
bogus1.pprice.voice.test.adtran.com
bogus2.pprice.voice.test.adtran.com
60000CRG0-35E
Command was introduced.
show voip name-service name-table on page
Last Resolved Address
1.2.3.3
1.2.3.3
0.0.0.0
1.2.3.1
1.2.3.2
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
826. The right column shows the
825