ADTRAN AOS Version R10.1.0 Command Reference Manual page 908

Command Reference Guide
clock set <time> <day> <month> <year>
Use the clock set command to configure the system software clock. For the command to be valid, all fields
must be entered. Refer to the Usage Examples below for an example.
Syntax Description
<time>
<day>
<month>
<year>
Default Values
No default values are necessary for this command.
Command History
Release 6.1
Release 11.1
Usage Examples
The following example sets the system software clock for 3:42 pm, August 22 2004:
(config)#clock set 15:42:00 22 Au 2004
60000CRG0-35E
Sets the time (in 24-hour format) of the system software clock in the format
hours:minutes:seconds (HH:MM:SS).
Sets the current day of the month. Valid range is 1 to 31.
Sets the current month. Valid range is January to December. You need
only enter enough characters to make the entry unique. This entry is not
case sensitive.
Sets the current year. Valid range is 2000 to 2100.
Command was introduced.
Command was added to the Global command set.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
908