ADTRAN AOS Version R10.1.0 Command Reference Manual page 327

Command Reference Guide
debug ipv6 routing
Use the debug ipv6 routing command to activate debug messages associated with Internet Protocol
version 6 (IPv6) routing table events. Adding the VRF name to this command displays debug information
for the named VPN routing and forwarding (VRF). Debug messages are displayed (real time) to the
terminal (or Telnet) screen. Use the no form of this command to disable the debug messages. Variations of
this command include the following:
debug ipv6 routing
debug ipv6 routing vrf <name>
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
vrf <name>
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 18.1
Functional Notes
VRF on AOS products allows a single physical router to be partitioned into multiple virtual routers. Each
router instance has its own route table and interface assignments. Beginning with Release 16.1, all AOS
routers supporting multiple VRF instances (multi-VRF) have an unnamed default VRF instance regardless
of whether multi-VRF is configured. Therefore, executing the abovementioned commands without
specifying a VRF will only affect the default unnamed VRF.
Usage Examples
The following example activates debug messages associated with IPv6 routing table events:
>enable
#debug ipv6 routing
60000CRG0-35E
Optional. Displays debug information only for the specified VRF. If a VRF is
not specified, the default unnamed VRF is assumed.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
327