Command Reference Guide
Enable Mode Command Set
Usage Examples
The following example displays route cache statistics for the default VRF instance:
>enable
#show ipv6 cache
INGRESS: giga-eth 0/1.1001
DEST: 2001:1111:2222:3333:4444:5555:6666:7777, EGRESS: giga-eth 0/1.1002,
COUNT: 1000000000, GATEWAY: 2001:1111:2222:3333:4444:5555:6666:0001,
MAC: 00:a0:c8:00:00:01, ID: 0x01000000
DEST: 2001::1, EGRESS: ppp 1,
COUNT: 100, GATEWAY: 2001::1:0001,
MAC: n/a, ID: 0x01010000
DEST: 2001::2, EGRESS: ppp 1,
COUNT: 100, GATEWAY: 2001::1:0001,
MAC: n/a, ID: 0x01020000
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
622