ADTRAN AOS Version R10.1.0 Command Reference Manual page 347

Command Reference Guide
debug port security
Use the debug port security command to display messages associated with port security. Debug messages
are displayed (real time) to the terminal (or Telnet) screen. Use the no form of this command to disable the
debug messages.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 8.1
Usage Examples
The following example activates port security debug messages:
>enable
#debug port security
60000CRG0-35E
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
347