ADTRAN AOS Version R10.1.0 Command Reference Manual page 1153

Command Reference Guide
ip sip proxy transparent
Use the ip sip proxy transparent command to enable Session Initiation Protocol (SIP) proxy operation in
the Transparent mode. Use the no form of this command to disable this feature. Variations of this
command include:
ip sip proxy transparent
ip sip proxy transparent nat-simulate
Syntax Description
nat-simulate
Default Values
By default, this feature is disabled.
Command History
Release 16.1
Release A1
Functional Notes
For an AOS product to use SIP proxy in transparent mode, SIP proxy must be enabled. To enable SIP
proxy, enter the ip sip proxy command before entering the ip sip proxy transparent command.
For an AOS data product to use SIP proxy in transparent mode, the firewall SIP application layer gateway
(ALG) must be disabled. For more information on disabling the firewall SIP ALG, refer to the command
firewall alg on page 1004.
For more information on the operation and configuration of SIP proxy in transparent mode, refer to the the
Configuring SIP Proxy in AOS configuration guide available online at
(article number 2183).
Usage Examples
The following example enables SIP proxy to operate in transparent mode on an AOS voice product:
(config)#ip sip proxy
(config)#ip sip proxy transparent
The following example enables SIP proxy to operate in transparent mode on an AOS data product:
(config)#no ip firewall alg sip
(config)#ip sip proxy
(config)#ip sip proxy transparent
60000CRG0-35E
Optional. Specifies the network address translation (NAT) simulation.
Command was introduced.
Command was expanded to include the NAT simulation.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
https://supportforums.adtran.com
ip
1153