Command Reference Guide
Enable Mode Command Set
copy https
Use the copy https command to copy a file located on a secure socket Hypertext Transfer Protocol Secure
(HTTPS) server to a specified destination using the HTTPS PUT operation.
Variations of this command (valid on all AOS units) include:
copy https <url> flash <destination file>
copy https <url> flash <destination file> force-overwrite
copy https <url> flash <destination file> force-overwrite port <port>
copy https <url> flash <destination file> port <port>
copy http <url> running-config
copy http <url> running-config port <port>
copy http <url> startup-config
copy http <url> startup-config port <port>
®
Variations of this command (valid only on AOS units WITH CompactFlash
capability) include:
copy https <url> cflash <destination file>
copy https <url> cflash <destination file> force-overwrite
copy https <url> cflash <destination file> force-overwrite port <port>
copy https <url> cflash <destination file> port <port>
copy https <url> cflash running-config
copy https <url> cflash running-config port <port>
Variations of this command (valid only on AOS units WITH CompactFlash AND voice capability)
include:
copy https <url> dynvoice-config
Variations of this command (valid only on AOS units WITH ramdisk enabled) include:
copy https <url> ramdisk <destination file>
copy https <url> ramdisk <destination file> force-overwrite
copy https <url> ramdisk <destination file> force-overwrite port <port>
copy https <url> ramdisk <destination file> port <port>
copy https <url> ramdisk running-config
copy https <url> ramdisk running-config port <port>
Variations of this command (valid only on AOS units WITH Universal Serial Bus (USB) flash drive
capability) include:
copy https <url> usbdrive0 <destination file>
copy https <url> usbdrive0 <destination file> force-overwrite
copy https <url> usbdrive0 <destination file> force-overwrite port <port>
copy https <url> usbdrive0 <destination file> port <port>
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
202
Need help?
Do you have a question about the AOS Version R10.1.0 and is the answer not in the manual?
Questions and answers