ADTRAN AOS Version R10.1.0 Command Reference Manual page 870

Command Reference Guide
aaa authentication fail-message <message>
Use the aaa authentication fail-message command to specify the authentication, authorization, and
accounting (AAA) authentication fail message. This message is displayed if user authentication fails. Use
the no form of this command to return to the default message.
Syntax Description
<message>
Default Values
By default, the authentication fail message banner is set to Authentication failed.
Command History
Release 5.1
Usage Examples
The following example changes the authentication fail message to Failed Authentication. Please try
again.:
(config)#aaa authentication fail-message #
Enter TEXT message. End with the character '#'.
Failed Authentication. Please try again.
(config)#
60000CRG0-35E
Specifies the message shown if user authentication fails. The message can
be multiple lines. Enter a delimiter (such as #) to begin recording the typed
text message displayed after a failed authentication attempt. The message
must end with the same delimiter to indicate that the message is complete.
The text delimiters are not displayed to the screen during operation.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
870