Table of Contents
Advertisement
Command Reference Guide
debug ip pim-sparse joinprune
Use the debug ip pim-sparse joinprune command to display protocol-independent multicast (PIM)
sparse mode join and prune transactions. Debug messages are displayed (real time) to the terminal (or
Telnet) screen. Use the no form of this command to disable the debug messages. Variations of this
command include:
debug ip pim-sparse joinprune
debug ip pim-sparse joinprune event
debug ip pim-sparse joinprune event <multicast address>
debug ip pim-sparse joinprune state
debug ip pim-sparse joinprune state <multicast address>
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
event
state
<multicast address>
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 11.1
Usage Examples
The following example activates PIM sparse mode messages for all join and prune events and state
changes:
>enable
#debug ip pim-sparse joinprune
14:27:05: PIMSM: Processed JOIN(*, 239.255.255.250) from 10.10.10.2
14:27:29: PIMSM: Processed JOIN(10.100.13.240, 239.192.19.136) from 10.10.10.2
14:27:29: PIMSM: Processed JOIN(*, 239.192.19.136) from 10.10.10.2
14:27:56: PIMSM: Sent JOIN(10.100.13.240, 239.192.19.136) to 10.100.13.240
14:28:05: PIMSM: Processed JOIN(*, 239.255.255.250) from 10.10.10.2
60000CRG0-35E
Optional. Displays PIM sparse join and prune events.
Optional. Displays PIM sparse join and prune state changes.
Optional. Specifies multicast group IP address to filter. The multicast group
IP address range is 244.0.0.0 to 239.255.255.255 or 224.0.0.0 /4.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
300
Advertisement
Table of Contents
