ADTRAN AOS Version R10.1.0 Command Reference Manual page 851

Command Reference Guide
write
Use the write command to save the running configuration to the unit's nonvolatile random access memory
(NVRAM) or a Trivial File Transfer Protocol (TFTP) server. Also, use the write command to clear
NVRAM or to display the running configuration on the terminal screen. Entering the write command with
no other arguments copies your configuration changes to the unit's NVRAM. Once the save is complete,
the changes are retained even if the unit is shut down or suffers a power outage. Variations of this
command include:
write
write dynvoice-config
write erase
write memory
write network
write terminal
Syntax Description
dynvoice-config
erase
memory
network
terminal
Default Values
No default values are necessary for this command.
Command History
Release 3.1
Usage Examples
The following example saves the current configuration to the unit's NVRAM:
>enable
#write memory
60000CRG0-35E
Optional. Writes dynvoice configuration information to the unit's NVRAM.
Optional. Erases the configuration files saved to the unit's NVRAM.
Optional. Saves the current configuration to NVRAM.
Optional. Saves the current configuration to the network TFTP server.
Optional. Displays the current configuration on the terminal screen.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
851