ADTRAN AOS Version R10.1.0 Command Reference Manual page 501

Command Reference Guide
show frame-relay
Use the show frame-relay command to display configuration and status parameters for configured virtual
Frame Relay interfaces. Variations of this command include the following:
show frame-relay lmi
show frame-relay pvc
show frame-relay pvc interface frame-relay <interface>
show frame-relay pvc interface frame-relay <interface> realtime
show frame-relay pvc realtime
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Using the realtime argument for this command can adversely affect the performance of
your unit.
Syntax Description
lmi
pvc
interface frame-relay <interface>
realtime
Default Values
No default values are necessary for this command.
Command History
Release 1.1
Release 10.1
Release 17.1
60000CRG0-35E
83.
Displays local management interface (LMI) statistics for each virtual
Frame Relay interface.
Displays permanent virtual circuit (PVC) configuration and statistics
for all virtual Frame Relay interfaces (or a specified interface).
Optional. Displays Frame Relay PVC statistics for a specific Frame
Relay interface (for example, fr 1).
Optional. Displays full-screen output in real time. Refer to the
Functional Notes below for more information.
Command was introduced.
Realtime parameter was introduced.
Command was expanded to include the modifiers begin, exclude,
and include.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
501