ADTRAN AOS Version R10.1.0 Command Reference Manual page 814

Command Reference Guide
show voice speed-dial
Use the show voice speed-dial command to display system speed dial information. Variations of this
command include:
show voice speed-dial
show voice speed-dial <number>
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
<number>
Default Values
No default values are necessary for this command.
Command History
Release 11.1
Release 17.1
Usage Examples
The following example displays information on speed dial number 50:
>enable
#show voice speed-dial 50
speed-dial - ID: 50
Name: Main Office
Number: 4000
60000CRG0-35E
Optional. Displays information about a specific speed dial number. Valid
range is 1 to 99.
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
814