ADTRAN AOS Version R10.1.0 Command Reference Manual page 237

Command Reference Guide
debug dial-backup
Use the debug dial-backup command to activate debug messages associated with dial-backup operation.
Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use the no form of this
command to disable the debug messages.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 1.1
Release 2.1
Functional Notes
The debug dial-backup command activates debug messages to aid in the troubleshooting of dial-backup
links.
Usage Examples
The following example activates debug messages for dial-backup operation:
>enable
#debug dial-backup
60000CRG0-35E
Command was introduced.
Additional debug messages were implemented for dial-backup operation to
ADTRAN's IQ and Express Series products.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
237