ADTRAN AOS Version R10.1.0 Command Reference Manual page 390

Command Reference Guide Enable Mode Command Set
mount usbdrive0
Use the mount usbdrive0 command to mount a Universal Serial Bus (USB) flash drive device.
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release 18.2 Command was introduced.
Usage Examples
The following example mounts a USB flash drive device onto the AOS unit:
>enable
#mount usbdrive0
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 390