Debug Crypto - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

debug crypto

Use the debug crypto command to activate debug messages associated with Internet key exchange (IKE)
and Internet Protocol security (IPsec) functions. Debug messages are displayed (real time) to the terminal
(or Telnet) screen. Use the no form of this command to disable the debug messages.Variations of this
command include:
debug crypto ike
debug crypto ike client authentication
debug crypto ike client configuration
debug crypto ike negotiation
debug crypto ipsec
debug crypto pki
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
ike
ike client authentication
ike client configuration
ike negotiation
ipsec
pki
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 4.1
Release 6.1
Usage Examples
The following example activates the IPsec debug messages:
>enable
#debug crypto ipsec
60000CRG0-35E
Activates all IKE debug messages.
Optional. Displays IKE client authentication messages as they occur.
Optional. Displays mode-config exchanges as they take place over the IKE
SA. It is enabled independently from the debug ike negotiation
messaging.
Optional. Activates only IKE key management debug messages (e.g.,
handshaking).
Activates all IPsec debug messages.
Activates all public key infrastructure (PKI) debug messages.
Command was introduced.
Debug pki command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
232