ADTRAN AOS Version R10.1.0 Command Reference Manual page 178

Command Reference Guide
clear vrrp counters
Use the clear vrrp counters command to clear the Virtual Router Redundancy Protocol (VRRP) statistics.
The following are variations of this command:
clear vrrp counters
clear vrrp counters interface <interface>
clear vrrp counters interface <interface> group <number>
Syntax Description
interface <interface>
group <number>
Default Values
No default values are necessary for this command.
Command History
Release 16.1
Release A4.01
Release A5.01
Functional Notes
Although VRRP group virtual router IDs (VRIDs) can be numbered between 1 and 255, only two VRRP
routers per interface are supported.
Usage Examples
The following example clears all VRRP group statistics on all interfaces:
>enable
#clear vrrp counters
60000CRG0-35E
Optional. Clears all VRRP statistics on the specified interface. Specify an
interface in the format <interface type [slot/port | slot/port.subinterface id |
interface id | interface id.subinterface id | ap | ap/radio | ap/radio.vap]>. For
example, for an Ethernet subinterface, use eth 0/1.1; for a PPP interface,
use ppp 1; for an ATM subinterface, use atm 1.1; and for a wireless virtual
access point, use dot11ap 1/1.1. Type clear vrrp counters interface ? for
a complete list of valid interfaces.
Optional. Clears all VRRP statistics for the specified group on the specified
interface. Group numbers range from 1 to 255.
Command was introduced.
Command was expanded to include the Metro Ethernet Forum (MEF)
Ethernet interface.
Command was expanded to include the Gigabit Ethernet interface.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
178