Table of Contents
Advertisement
Command Reference Guide
Global Configuration Mode Command Set
ip sip proxy
Use the ip sip proxy command to enable Stateful and Outbound modes of Session Initiation Protocol (SIP)
proxy operation at the global level. Use the no form of this command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, this feature is disabled.
Command History
Release 16.1
Command was introduced.
Functional Notes
Although the ip sip proxy command enables Stateful and Outbound modes of SIP proxy operation, it is
also necessary to use this command in conjunction with the ip sip proxy transparent command for
transparent proxy mode. For more information about transparent proxy, refer to the command
ip sip proxy
transparent on page
1153.
For more information about SIP proxy, refer to the Configuring SIP Proxy in AOS configuration guide
available online at
https://supportforums.adtran.com
(article number 2183).
Usage Examples
The following example allows the SIP proxy server to operate in the Stateful and Outbound modes:
(config)#ip sip proxy
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
1129
Advertisement
Table of Contents
