ADTRAN AOS Version R10.1.0 Command Reference Manual page 431

Command Reference Guide
Command History
Release 10.1
Release 17.1
Release 18.3
Release R10.1.0
Usage Examples
In the following example, all BGP routes are displayed whose community numbers match those listed in
the show bgp community command.
>enable
#show bgp ipv4 community local-as 10:405
BGP local router ID is 10.22.131.241, local AS is 302.
Status codes: * valid, > best, i - internal, o - local
Origin codes: i - IGP, e - EGP, ? - incomplete
NetworkNext HopMetric LocPrf Path
10.22.152.20/3010.22.131.10304302 300 1 3 4 i
10.22.152.24/2910.22.131.10304302 300 1 3 4 5 i
10.22.152.36/3010.22.131.10 304302 300 1 3 4 i
10.22.152.52/3010.22.131.10304302 300 1 3 4 i
11.0.0.0/3010.22.131.10304
12.0.0.0/30 10.22.131.10304
13.0.0.0/30 10.22.131.10304
14.0.0.0/3010.22.131.10304
Total RIB entries = 8
Information displayed includes: the ID of this router and its autonomous system (AS) number; the
destination Network address of the route learned; the Next-Hop address to that network; the Metric; the
Local Preference (LocPrf) value (set using the command set local-preference); and the AS Path to the
destination network.
The following is sample output for the show bgp ipv4 community command with an exact match
specified. BGP routes with the community numbers specified and only those specified are shown.
60000CRG0-35E
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Command syntax was changed to remove the ip keyword for IPv6 support
in ADTRAN internetworking products. Command was also expanded to
include the any-vrf, ipv4, vrf <name>, and exact parameters.
Command syntax was changed to remove the ip keyword for IPv6 support
in ADTRAN voice products. Command was also expanded to include the
ipv6 parameter.
302 300 1 3 4 6 i
302 300 1 3 4 6 i
302 300 1 3 4 6 i
302 300 1 3 4 6 i
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
431