ADTRAN AOS Version R10.1.0 Command Reference Manual page 837

Command Reference Guide
terminal length <number>
The terminal length command sets the number of rows (lines) for a terminal session. Use the no form of
this command to return to the default value. This command is only valid for the current session and returns
to the default (24 rows) when the session closes.
Syntax Description
<number>
Default Values
The default setting for this command is 24 rows.
Command History
Release 6.1
Usage Examples
The following example sets the number of rows for a terminal session to 30.
>enable
#terminal length 30
60000CRG0-35E
Specifies the number of rows for a terminal session. Range is 0 to 480 lines.
Setting the terminal length to 0 disables paging.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
837