ADTRAN AOS Version R10.1.0 Command Reference Manual page 632

Command Reference Guide
Command History
Release 18.1
Functional Notes
VRF on AOS products allows a single physical router to be partitioned into multiple virtual routers. Each
router instance has its own route table and interface assignments. Beginning with Release 16.1, all AOS
routers supporting multiple VRF instances (multi-VRF) have an unnamed default VRF instance regardless
of whether multi-VRF is configured. Therefore, executing the abovementioned commands without
specifying a VRF will only affect the default unnamed VRF.
Usage Examples
The following is sample output of the show ipv6 neighbors command, which displays all information for
the ND cache:
>enable
#show ipv6 neighbors
IPv6 Address
2002::1
2003::ED9A:D1A3:BB9B:BDFF
20FF:11::ED9A:D1A3:BB9B:BDFF
FE80::213:CEFF:FE61:65B9
FE80::20F:35FF:FE2E:2ABA
60000CRG0-35E
Command was introduced.
Age Link-layer Addr
0 000f.352.3.2aba
0 0013.ce61.65b9
18 0013.ce.61.65b9
10 0013.ce.61.65b9
1 000f.352e.2aba
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
State Interface
REACH eth 0/0
REACH eth 0/1
STALE eth 0/1
DELAY eth 0/1
DELAY eth 0/1
632