ADTRAN AOS Version R10.1.0 Command Reference Manual page 468

Command Reference Guide
show desktop-auditing dhcp
Use the show desktop-auditing dhcp command to display collected network access protection (NAP) and
Dynamic Host Configuration Protocol (DHCP) information for clients connected to the network. The
display of the collected information can be for all connected clients or for a specific client. Variations of
this command include:
show desktop-auditing dhcp
show desktop-auditing dhcp antispyware 3rd-party
show desktop-auditing dhcp antispyware disabled
show desktop-auditing dhcp antispyware out-of-date
show desktop-auditing dhcp antispyware snoozed
show desktop-auditing dhcp antivirus 3rd-party
show desktop-auditing dhcp antivirus disabled
show desktop-auditing dhcp antivirus out-of-date
show desktop-auditing dhcp antivirus snoozed
show desktop-auditing dhcp auto-updates disabled
show desktop-auditing dhcp auto-updates not-checking
show desktop-auditing dhcp auto-updates not-downloading
show desktop-auditing dhcp auto-updates not-installing
show desktop-auditing dhcp brief
show desktop-auditing dhcp firewall 3rd-party
show desktop-auditing dhcp firewall disabled
show desktop-auditing dhcp firewall snoozed
show desktop-auditing dhcp hostname <hostname>
show desktop-auditing dhcp interface gigabit-switchport <slot/port>
show desktop-auditing dhcp ip <ip address>
show desktop-auditing dhcp local-violators
show desktop-auditing dhcp mac <mac address>
show desktop-auditing dhcp server-restricted
show desktop-auditing dhcp server-violators
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
antispyware
3rd-party
60000CRG0-35E
83.
Optional. Displays NAP information only for clients with the
specified antispyware status.
Displays NAP information only for clients with third-party
antispyware.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
468