ADTRAN AOS Version R10.1.0 Command Reference Manual page 189

Command Reference Guide
tftp
xmodem
Default Values
No default values are necessary for this command.
Command History
Release 8.1
Release 16.1
Release 17.2
Release A4.01
Release A4.05
Usage Examples
The following example copies the source file myfile.biz (located on the CompactFlash card) to flash
memory (naming the new file newfile.biz):
>enable
#copy cflash myfile.biz flash newfile.biz
The following example creates a copy of the file myfile.biz (located on the CompactFlash card), names
the new file newfile.biz, and places the new file on the installed CompactFlash card:
>enable
#copy cflash myfile.biz cflash newfile.biz
60000CRG0-35E
Copies any file on the CompactFlash card to a specified Trivial File Transfer
Protocol (TFTP) server.
After entering copy cflash tftp, AOS prompts for the following information:
Address of remote host:
Source filename:
Destination filename:
Copies any file on the CompactFlash card (using the XMODEM protocol) to
the terminal connected to the console port. XMODEM capability is provided
in VT100 terminal emulation software, such as HyperTerminal.
After entering copy cflash xmodem, AOS prompts for the following
information:
Source filename:
Command was introduced.
Command was expanded to include HTTP and HTTPS.
Command was expanded to include the cellular interface.
Command was expanded to include the Metro Ethernet Forum (MEF)
Ethernet interface.
Command was expanded to include the asymmetric digital subscriber line
(ADSL) interface.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
Specifies the IP address of the TFTP server.
Specifies the name of the file to copy to the TFTP
server.
Specifies the file name to use when storing the
copied file on the TFTP server. (The file will be
placed in the default directory established by the
TFTP server.)
Specifies the name of the file to copy from
CompactFlash to the connected terminal.
189