ADTRAN AOS Version R10.1.0 Command Reference Manual page 224

Command Reference Guide
debug atm packet
Use the debug atm packet command to activate debug messages associated with packets on asynchronous
transfer mode (ATM) ports and virtual circuits. Debug messages are displayed (real time) to the terminal
(or Telnet) screen. Use the no form of this command to disable the debug messages. Variations of this
command include the following:
debug atm packet
debug atm packet interface atm <port id>
debug atm packet interface atm <port id> vcd <number>
debug atm packet vc <VPI/VCI>
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
interface atm <port id>
vc <VPI/VCI>
vcd <number>
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 8.1
Usage Examples
The following example activates debug ATM packet debug messages on ATM port 1:
>enable
#debug atm packet interface atm 1
60000CRG0-35E
Optional. Activates packet debug messages for a specific ATM port and for
all virtual circuits.
Optional. Activates packet debug messages for the specified virtual circuit
identified by the virtual path identifier and virtual channel identifier
(VPI/VCI).
Optional. Activates packet debug messages for the specified virtual circuit
descriptors (VCDs).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
224