ADTRAN AOS Version R10.1.0 Command Reference Manual page 1098

Command Reference Guide
ip rtp quality-monitoring threshold pq-mos
Use the ip rtp quality-monitoring threshold pq-mos command to specify threshold values for logging
perceived quality (PQ) mean opinion score (MOS) events during voice quality monitoring (VQM). When
the call quality detected in the Realtime Transport Protocol (RTP) stream is less than the specified event
threshold, an event message is generated. Use the no form of this command disables the event reporting for
that message type and threshold. Variations of this command include:
ip rtp quality-monitoring threshold pq-mos error
ip rtp quality-monitoring threshold pq-mos error <value>
ip rtp quality-monitoring threshold pq-mos info
ip rtp quality-monitoring threshold pq-mos info <value>
ip rtp quality-monitoring threshold pq-mos notice
ip rtp quality-monitoring threshold pq-mos notice <value>
ip rtp quality-monitoring threshold pq-mos warning
ip rtp quality-monitoring threshold pq-mos warning <value>
Syntax Description
error
info
notice
warning
<value>
Default Values
By default, the PQ MOS thresholds are info 4.40, notice 4.00, warning 3.60, and error 2.60.
Command History
Release 17.1
Usage Examples
The following example enables VQM PQ MOS info messages to be logged if the PQ MOS scores fall
below 4.25:
(config)#ip rtp quality-monitoring threshold pq-mos info 4.25
60000CRG0-35E
Specifies the threshold for listening quality PQ MOS error messages to be
logged.
Specifies the threshold for listening quality PQ MOS information messages
to be logged.
Specifies the threshold for listening quality PQ MOS notice messages to be
logged.
Specifies the threshold for listening quality PQ MOS warning messages to
be logged.
Optional. The range is 0 to 4.4.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1098