Command Reference Guide
Usage Examples
The following is sample output of the debug network-forensics ip dhcp command:
>enable
#debug network-forensics ip dhcp
2009.08.31 14:30:30 NETWORK_FORENSICS.IP.DHCP.giga-swx 0/5 Discover from 00:E0:29:0E:D5:E3
(xpsp3-host)
2009.08.31 14:30:31 NETWORK_FORENSICS.IP.DHCP.giga-swx 0/24 Offer from
00:E0:29:0E:D5:E5/10.23.220.254 to 00:E0:29:0E:D5:E3 of 10.23.220.1/255.255.255.0(xpsp3-host)
2009.08.31 14:30:31 NETWORK_FORENSICS.IP.DHCP.giga-swx 0/5 Request from 00:E0:29:0E:D5:E3
10.23.220.1/255.255.255.0 (xpsp3-host) to 00:E0:29:0E:D5:E5/10.23.220.254
2009.08.31 14:30:31 NETWORK_FORENSICS.IP.DHCP.giga-swx 0/24 Ack from
00:E0:29:0E:D5:E5/10.23.220.254 to 00:E0:29:0E:D5:E3 of 10.23.220.1/255.255.255.0 (xpsp3-host)
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
339