ADTRAN AOS Version R10.1.0 Command Reference Manual page 739

Command Reference Guide
show sip location
Use the show sip location command to display Session Initiation Protocol (SIP) statistical and registration
information. Variations of this command include:
show sip location
show sip location dynamic
show sip location static
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
dynamic
static
Default Values
No default values are necessary for this command.
Command History
Release 11.1
Release 12.1
Release 17.1
Usage Examples
The following is sample output from the show sip location static command:
>enable
#show sip location static
User IP Address
-----------------------------------------------------------------------------
9001 1.1.1.2
9002 10.10.10.2
60000CRG0-35E
Optional. Displays SIP location database dynamic entries.
Optional. Displays SIP location database static entries.
Command was introduced.
Command output was updated.
Command was expanded to include the modifiers begin, exclude, and
include.
Port Expires Source
5060 52 Registrar
5060 3336 Registrar
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
739