ADTRAN AOS Version R10.1.0 Command Reference Manual page 875

Command Reference Guide
aaa authentication port-auth default
Use the aaa authentication port-auth default command to create and define the default method list for
use with authentication, authorization, and accounting (AAA) port authentication services. Use the no
form of this command to disable the authentication list. Variations of this command include:
aaa authentication port-auth default group radius
aaa authentication port-auth default group <name>
aaa authentication port-auth default local
aaa authentication port-auth default none
Each method parameter after default specifies the authentication method to be attempted
in the order in which they are to be tried. Multiple methods can be specified for
authentication, but the authentication procedure is dependent upon the entry order of the
methods.
Syntax Description
none
local
group radius
group <name>
Default Values
By default, no port authentication method lists are defined.
Command History
Release 10.1
Functional Notes
AAA authentication is an AAA service that helps verify user logins, user access to the Enable mode, and
port usage. Authentication works by verifying user credentials with those stored on a server. In AOS, AAA
authentication can verify port usage by using the aaa authentication port-auth default command to
create the default method list that monitors port usage.
60000CRG0-35E
Specifies that no authentication methods are used. If this method is
entered, it should come at the end of the list of authentication methods in
the command entry. This method should only be used to prevent a lock-out
situation.
Specifies using the local user name for port authentication. User names
must be in the local user name database to use this method. User names
are set using the command
on page 1373.
Specifies that all defined remote authentication dial-in user service
(RADIUS) servers are used for authentication. RADIUS servers must be
configured to use this method. Refer to the Functional Notes for more
information.
Specifies using a subset of RADIUS servers for port authentication. Subsets
are named server groups previously created using the command
server on page 886. A server group must be configured to use this method.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
username <username> password <password>
aaa group
875