ADTRAN AOS Version R10.1.0 Command Reference Manual page 508

Command Reference Guide
show gvrp members vlan <vlan id>
Use the show gvrp members vlan command to display GARP VLAN Registration Protocol (GVRP)
GARP information propagation members.
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
<vlan id>
Default Values
No default values are necessary for this command.
Command History
Release 17.5
Usage Examples
The following example displays sample output from this command:
>enable
#show gvrp members vlan 200
VLAN 200: Total Members 1
60000CRG0-35E
Specifies which VLAN's members are displayed.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
508