ADTRAN AOS Version R10.1.0 Command Reference Manual page 936

Command Reference Guide
domain-name <domain name>
Use the domain-name command to define a default IPv4 or IPv6 domain name to be used by AOS to
resolve host names. Use the no form of this command to disable this function. Variations of this command
include:
domain-name <domain name>
domain-name vrf <name> <domain name>
Syntax Description
<domain name>
vrf <name>
Default Values
By default, this command is disabled.
Command History
Release 3.1
Release 16.1
Release 18.3
Release R10.1.0
Functional Notes
Use the domain-name command to set a default name that will be used to complete any IPv4 or IPv6 host
name that is invalid (i.e., any name that is not recognized by the name server). When this command is
enabled, any IPv4 or IPv6 host name that is not initially recognized will have the domain-name appended
to it and the request will be re-sent.
VRF on AOS products allows a single physical router to be partitioned into multiple virtual routers. Each
router instance has its own route table and interface assignments. Beginning with Release 16.1, all AOS
routers supporting multiple VRF instances (multi-VRF) have an unnamed default VRF instance regardless
of whether multi-VRF is configured. Therefore, executing the abovementioned commands without
specifying a VRF will only affect the default unnamed VRF.
Each VRF instance has its own domain name. Specifying a VRF name in the command applies the domain
name to the named VRF. Issuing the command without specifying a VRF applies the command to the
default unnamed VRF.
60000CRG0-35E
Specifies the default IPv4 or IPv6 domain name used to resolve unqualified
host names. Do not include the initial period that separates the unresolved
name from the default domain name.
Optional. Specifies a nondefault VPN routing and forwarding (VRF) instance
for the domain name.
Command was introduced.
Command was expanded to include the vrf parameter.
Command syntax was changed to remove the ip keyword for ADTRAN
internetworking products.
Command syntax was changed to remove the ip keyword for ADTRAN
voice products.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
936