ADTRAN AOS Version R10.1.0 Command Reference Manual page 198

Command Reference Guide
Release 17.2
Release 17.7
Release A4.01
Release A4.05
Release 18.2
Release A5.01
Usage Examples
The following example creates a copy of the file myfile.biz (located in flash memory), names the new file
newfile.biz, and places the new file in flash memory:
>enable
#copy flash myfile.biz flash newfile.biz
The following example copies the file myfile.biz (located in flash memory) to CompactFlash memory
(naming the new file newfile.biz):
>enable
#copy flash myfile.biz cflash newfile.biz
The following example copies the file new_startup_config.txt (located in flash memory) to the startup
configuration:
>enable
#copy flash new_startup_config.txt startup-config
The following example copies the software file myfile.biz (located in flash memory) to a TFTP server:
>enable
#copy flash tftp
Address of remote host? 10.200.2.4
Source filename? myfile.biz
Destination filename? myfile.biz
Initiating TFTP transfer...
Sent 769060 bytes.
Transfer Complete!
The following example copies the file myfile.biz (located in flash memory) to USB flash drive memory
(naming the new file newfile.biz):
>enable
#copy flash myfile.biz usbdrive0 newfile.biz
60000CRG0-35E
Command was expanded to include the cellular interface.
Command was expanded to include the ramdisk parameter.
Command was expanded to include the Metro Ethernet Forum (MEF)
Ethernet interface.
Command was expanded to include the asymmetric digital subscriber line
(ADSL) interface.
Command was expanded to include USB flash drive memory.
Command was expanded to include the fpga parameter.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
198