ADTRAN AOS Version R10.1.0 Command Reference Manual page 962

Command Reference Guide
http ip access-class <ipv4 acl name> in
Use the http ip access-class in command to restrict access to the Hypertext Transfer Protocol (HTTP)
server using the specified Internet Protocol version 4 (IPv4) access control list (ACL). Use the no form of
this command to remove the IPv4 ACL from the HTTP connection.
Syntax Description
<ipv4 acl name>
Default Values
By default, no IPv4 ACLs are applied to HTTP connections.
Command History
Release 3.1
Release 18.3
Release R10.1.0
Usage Examples
The following example specifies that HTTP access is restricted by applying the previously configured IPv4
ACL (MyIPv4ACL):
(config)#http ip access-class MyIPv4ACL in
60000CRG0-35E
Specifies the previously configured IPv4 ACL to use for HTTP access
restriction.
Command was introduced.
Command syntax was changed to relocate the ip keyword for IPv6 support
in ADTRAN internetworking products.
Command syntax was changed to relocate the ip keyword for IPv6 support
in ADTRAN voice products.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
962