ADTRAN AOS Version R10.1.0 Command Reference Manual page 806

Command Reference Guide
show voice phone-files
Use the show voice phone-files command to display files required for Session Initiation Protocol (SIP)
phone configuration.
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release 12.1
Release 17.1
Usage Examples
The following example shows sample output from the show voice phone-files command:
>enable
#show voice phone-files
03/02/2006 16:03 PM
03/02/2006 16:03 PM
03/02/2006 16:03 PM
03/14/2006 16:03 PM
7 File(s) 132516 bytes
0 Dir(s) 0 bytes
21019575 bytes used, 9720360 available, 30739935 total
60000CRG0-35E
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
216 0004f203f69c.cfg
687 5001-0004f203f69c.cfg
216 0004f203b0d6.cfg
306 polycom.cfg
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
806