ADTRAN AOS Version R10.1.0 Command Reference Manual page 1172

Command Reference Guide Global Configuration Mode Command Set
ip subnet-zero
The ip subnet-zero command is the default operation and cannot be disabled. This command signifies the
router's ability to route to subnet-zero subnets.
Syntax Description
No subcommands.
Default Values
By default, this command is enabled.
Command History
Release 3.1 Command was introduced.
Usage Examples
The following example subnet-zero is enabled:
(config)#ip subnet-zero
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 1172