ADTRAN AOS Version R10.1.0 Command Reference Manual page 360

Command Reference Guide
debug sip proxy
Use the debug sip proxy command to activate debug messages associated with Session Initiation Protocol
(SIP) proxy events. Debug messages are displayed (real time) on the terminal (or Telnet) screen. Use the
no form of this command to disable the debug messages. Variations of this command include:
debug sip proxy database
debug sip proxy dialogs
debug sip proxy register rate-adaption
debug sip proxy routing
debug sip proxy transactions
debug sip proxy verbose
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
database
dialogs
register rate-adaption
routing
transactions
verbose
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 16.1
Release A5.02
Usage Examples
The following example activates all debug messages associated with SIP proxy events:
>enable
#debug sip proxy verbose
60000CRG0-35E
Activates SIP proxy database debug event debug messages.
Activates SIP proxy DOM event debug messages.
Activates SIP proxy REGISTER rate adaption debug messages.
Activates SIP proxy message-routing events.
Activates SIP proxy event debug messages that shows the interaction
between the SIP proxy and the SIP stack.
Activates all SIP proxy debug messages.
Command was introduced.
Command was expanded to include the register rate-adaption parameter.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
360